A detailed installation guide for a 2005-2009 Skoda SUPERB car stereo with Capacitive multi-touch screen Quad-core CPU Mirror link DVD player Radio

In order to enjoy much convenience and enjoyment in your car, the best choice for you is to upgrade your factory radio. The procedure of installation is too difficult for some car owner? Absolutely not. You can simple to install it by yourself after reading this detailed installation guide for a 2005-2009 Skoda SUPERB car stereo. The following is the detailed procedure:

2005-2009 Skoda SUPERB after installation

2005-2009 Skoda SUPERB after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

2005-2009 Skoda SUPERB car stereo installation guide

1.Remove the trim panel with a lever.

Remove the trim panel with a lever

Remove the trim panel with a lever

2. Remove the panel on the radio with your hands.

Remove the panel on the radio with your hands

Remove the panel on the radio with your hands

3. Unscrew four screws holding the original car radio with a screwdriver.

Unscrew four screws holding the original car radio with a screwdriver

Unscrew four screws holding the original car radio with a screwdriver

4. Take the original car radio out of the dash.

Take the original car radio out of the dash

Take the original car radio out of the dash

5. Disconnect all the connectors at the back of the original car radio.

Disconnect all the connectors at the back of the original car radio

Disconnect all the connectors at the back of the original car radio

6. Check all the accessories for the new Seicane car stereo.

7. Connect the harnesses to the back of the new Seicane car stereo.

8. Connect the Seicane car stereo to your original car radio ‘s plugs.

9. Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

10. Put the new Seicane car stereo into the dash.

11. Put everything into their original place.

All above is the detailed installation guide for a 2005-2009 Skoda SUPERB car stereo. You probably have a general idea about how to install a new car stereo after reading this article. If you have any question, you can go to the dealer or professionals ask for help. If you still looking for a new car stereo, please feel free to check this link of 2005-2009 Skoda SUPERB car stereo from Seicane.

http://www.seicane.com/8-inch-3g-wifi-android-radio-navigation-system-for-2005-2009-skoda-superb-with-dvd-player-mirror-link-capacitive-multi-touch-screen-obd-dvr-tv-bluetooth-rear-view-camera-ipod-s168032

This great 2005-2009 Skoda SUPERB car stereo coming with 8 inch HD 1024*600 multi-touch screen, intelligent pure android 5.1.1 operation system. The system supports surfing internet via 3G or WiFi. It comes with WiFi module. You can perform Google search on the road with quick search box, play online games, watch videos, download online data and check emails by connecting to any WiFi hotspot in range or 3g internet. Wish you like it!

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *