First of all, please have a look at the following image. It is an amazing 2004 2005 2006 2007 Jeep Cherokee Commander Compass Patriot Wrangler car radio from Seicane with advanced configurations and the latest operation system for car owners who would like to upgrade the capabilities of the radio. Here comes a step-by-step installation guide for 2004 2005 2006 2007 Jeep Cherokee Commander Compass Patriot Wrangler car radio. If you own the same dashboard and plan to install your new radio, you can refer to this detailed guide from Seicane.
Some tips before the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2004 2005 2006 2007 Jeep Cherokee Commander Compass Patriot Wrangler car radio installation guide
1. The original car radio.
2. Adjust the shift lever to a lower gear, then loosen the black plastic part around the shift lever and rotate it aside.
3. Remove two Phillips screws inside the shifter bazel.
4. Pull the bottom portion of bazel , start working it around.
5. Use a flat plastic pry tool to pry the edge between the top platform and the front trim assembly so as to release the top platform.
6. Remove the top platform.
7. Use a screwdriver to unscrew the two top Phillips screws that fix the trim bazel. Then remove the bazel.
8. Remove four mounting screws that are holding the radio on the dashboard.
9. Take out the original radio from the dash.
10. Check all the accessories for the new Seicane car radio.
11. Connect the harnesses to the back of the new Seicane car radio.
12. Connect the Seicane car radio to your original radio’s plugs.
13. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
14. Put the new Seicane car radio into the dash.
15. Put everything into their original place. All the installation is done.
Wish you can learn some skills about the radio installation. If you meet any problems you cannot solve independently, you can turn to your dealer for valuable advice as well as ask a professional or an experienced person to help you alongside. Anyway, before the installation, please make sure that your car radio is compatible with your car. If you haven’t got a suitable car radio for your car, I’d like to recommend an amazing 2004 2005 2006 2007 Jeep Cherokee Commander Compass Patriot Wrangler car radio from Seicane. For more details, please click:
This car radio can runs faster than even since it is based on the pure Android 6.0 operation system and a R16 1.6 GHz Quad-core CPU. Coming with a 9 inch 1024*600 HD multi-touch digital capacitive LCD screen, this great radio enables you not only to easily operate it but also to freely enjoy the best display of videos and view of the navigation. With the assistance of the 3D GPS navigation system in high precision, you can easily get the best route option to reach your ideal destinations without mistakes. Besides, the built-in Bluetooth technology makes it possible for you to connect your Bluetooth-enabled mobile phone with this unit so as to dial, receive or reject hands-free phone calls as well as enjoy Bluetooth music streaming from your phone music playlists. Wish you like it and good luck to you!