First show you a picture of Seicane 2008-2013 Ford Fiesta Radio after installation.
The factory radio in your Ford Fiesta may be adequate for listening to the radio. However, you may want to take advantage of additional features that come with new car radios. Aftermarket stereo incorporate the latest technologies. The factory stereo in your Fiesta, for example, can be upgrades to a unit with MP3 player capability or a fully integrated navigation system. To do this, first you’ll need to know how to install a radio on your Ford Fiesta.
2008-2013 Ford Fiesta Radio installation
1)First pry off the top panel and set it aside.
2)Remove two screws with a Phillips screwdriver.
3)Remove two 10mm bolts.
4)Then pull out the radio interface panel.
5) Disconnect connectors behind the panel.
6)Then take out the radio slowly.
7)Disconnect the connectors behind the radio.
8)Connect the harness with the new Seicane radio as user manual shows.
9)Put the new radio into dash.
10)Make sure everything is ok and turn on the new car stereo to have a careful check.
11)Fix screws and put panels back.
By the way, here is a good aftermarket radio of Seicane for 2008-2013 Ford Fiesta:
This Ford Fiesta Radio has intelligent android 4.4.4 operation system, high quality RK PX3 with 1.66 GHz frequency Quad-core CPU, and 9 inch HD 1024*600 Pixels multi touch screen with smooth operation high sensitivity.
Equipped with a WiFi module, the systems supports Internet surfing via 3G or WiFi. You can use the Quick Search Box on the Google search for roads, playing online games, watching videos, downloading online data, and checking emails by connecting to any WiFi hotspot in scope or 3G Internet. You can also install or remove any apps on RAM or SD according to your preference. The real-time traffic congestion maps can suggest you alternative routes to take so as to save you a lot of time.
Wish you can learn something from this essay, And have great fun with your new Ford Explorer Radio!
1)Before connecting,please make sure the ignition is off to avoid short circuit.
2)Ensure connect the yellow and red power cable at last.
3)Ensure that all loose wires are isolated with electricaltape
4)Ensure don’tangle the wire when tighten the moving parts(Such as seat rails).
5)Ensure that all GND is connected to the same place.
6)Using the improper fuse may cause damage of fire,so when replace the fuse,please consult the professional.