It is well known that a Jeep Commander always comes with a domineering appearance just as it was the king on the road. Equivalently, there should be an amazing Jeep Commander head unit in the vehicle to match its appearance. If you find the factory radio hard to meet all your needs, why not replace it with a modern multifunctional head unit integrated with a great deal of features you’d expect in a car stereo?
2008-2010 Jeep Commander head unit after installation
As a matter of fact, many Jeep Commander owners have upgraded their factory radio with a powerful aftermarket head unit to make their in-car environment to next level. Some of them even install it by themselves. Actually, the installation of a new head unit is not so complicated that you can do it by yourself if you have the detailed guide. But if you don’t install a head unit before, you’d better do it with the help of a professional technician in case of some irreparable damage is being made. The following is the detailed instructions about how to install a 2008-2010 Jeep Commander head unit in a correct way.
Precautions before installation:
1.Before you begin any work, remember to disconnect negative power cable to avoid danger
2.Please turn off your car series include the radio unit and park your car well
3.Before connecting, please make sure the ignition is off to avoid short circuit and connect the yellow and res cable at last
The below is the step-by-step procedure of the whole installation of a Jeep Commander head unit:
- Lever the trim panel with a pry tool.
2008-2010 Jeep Commander head unit installation step 1
- Remove the trim panel and disconnect cables at the back of it.
2008-2010 Jeep Commander head unit installation step 2
- Remove 4 screws holding the unit with a screw removal tool.
2008-2010 Jeep Commander head unit installation step 3
- Gently take out factory radio and disconnect cables at back of it.
2008-2010 Jeep Commander head unit installation step 4
- Connect the cables on the new head unit as the user manual shows and place them well.
connection 1
2008-2010 Jeep Commander head unit installation step 5-1
connection 2
2008-2010 Jeep Commander head unit installation step 5-2
connection 3
2008-2010 Jeep Commander head unit installation step 5-3
- Put the new head unit into the dash.
2008-2010 Jeep Commander head unit installation step 6
- Turn on the new head unit and have a comprehensive check if it works well.
- Install 4 screws back to their original position.
- Install the trim panel.
Above all, what comes the first before your installation is that you have a head unit which can fit your 2008-2010 Jeep Commander. If you are unsure about which unit is compatible with your car, please browse the following link which is about a top 2008-2010 Jeep Commander head unit from Seicane to have a careful check:
This hot selling car stereo is specially designed for 2008-2010 Jeep Commander. You can easily find your way to the destination with the accurate guidance and the voice prompts provided by the GPS navigation system. The built-in bluetooth technology allows you to make and receive phone calls with your hands on the steering wheel control as so to ensure your safety during the driving. What’s more, the large 6.2 inch multi-touch screen with HD 800*480 pixel resolution is excellent to watch movies and other videos in your vehicle. Take this Jeep Commander head unit and take command of the whole driving.
Recent Comments