A step-by-step installation guide for a 2001-2011 VW Volkswagen MK5 car stereo with 3G WiFi Mirror Link OBD2 Quad-core CPU 16G Flash HD 1080P Video

After a long-time use of the factory radio, you may find it can ‘t catch up with the latest features to meet your various kinds of requirements. In that case, it’s wise of you to replace it with a new aftermarket car stereo which won’t cost you much and can bring you a lot of convenience. The installation of a new stereo is also quite simple. If you own a 2001-2011 VW Volkswagen MK5, you can take the following 2001-2011 VW Volkswagen MK5 car stereo installation guide as a reference.

2001-2011 VW Volkswagen MK5 car stereo after installation

2001-2011 VW Volkswagen MK5 car stereo after installation

Precautions for this installation:

1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.

2.Please make sure that all fastened wires are isolated with electrical tape.

3.Please make sure the ignition is off to avoid short circuit.

4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400

 

2001-2011 VW Volkswagen MK5 car stereo installation instruction

1.The original car radio.

The original car radio

The original car radio

2.Insert four removal keys into the holes of the original car radio.

Insert four removal keys into the holes of the original car radio

Insert four removal keys into the holes of the original car radio

3.Gently take the original car radio out of the dashboard by pulling the removal keys as the following picture shows.

Gently take the original car radio out of the dashboard by pulling the removal keys as the following picture shows

Gently take the original car radio out of the dashboard by pulling the removal keys as the following picture shows

4.Disconnect the connectors at the back of the original radio.

5.Check all the accessories for the new Seicane car stereo.

Check all the accessories for the new Seicane car radio

Check all the accessories for the new Seicane car radio

6.Connect the harnesses to the back of the new Seicane car stereo.

Connect the harnesses to the back of the new Seicane car radio

Connect the harnesses to the back of the new Seicane car radio

7.Connect the Seicane car stereo to your original car radio ‘s plugs.

8.Turn on the new Seicane stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

9.Put the new Seicane stereo into the dash.

10.Put everything into their original place.

 

Are you able to install this 2001-2011 VW Volkswagen MK5 car stereo in your car under the guidance of this guide? If not, you can ask a professional for help. If there is any question, you can turn to your professional for help. Now you can refer to this great 2001-2011 VW Volkswagen MK5 car stereo from Seicane to check if you have a suitable stereo for your car, please check it on the following link:

http://www.seicane.com/seicane-s127648-android-in-dash-gps-dvd-bluetooth-system-for-2001-2011-vw-volkswagen-mk5-with-radio-rds-3g-wifi-mirror-link-obd2-hd-1080p-video-steering-wheel-control-mp3

Based on the most advanced Android 5.1.1 operation system, this powerful VW Volkswagen MK5 car stereo comes with high configuration for you to upgrade your factory radio. A number of advanced and practical features are developed for you to get the greatest convenience in your car, like the worldwide real-time GPS navigation, DVD and CD player, FM/AM radio, bluetooth wireless technology, USB and SD card connection, etc. Coming with special wiring harness, this unit is easy to install and just plug and play. Wish you like it and have an extraordinary experience with it on your way! Good luck!

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *