It’s easy for car owners to upgrade a factory radio to get a more comfortable in-car environment and a brand new driving experience. You just need to pick up a suitable car stereo and prepare for some removal and installation tools. Besides, to find a step-by-step installation guide can be much helpful. Here I’d like to share a detail 2004 2005 2006 2007 2008 Chrysler Pacifica car stereo installation instruction from Seicane to help Chrysler Pacifica owners who would like to replace their factory radio with a new one.
2004 2005 2006 2007 2008 Chrysler Pacifica car stereo after installation
Precautions for this installation:
1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2.Please make sure that all fastened wires are isolated with electrical tape.
3.Please make sure the ignition is off to avoid short circuit.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2004 2005 2006 2007 2008 Chrysler Pacifica car stereo installation guide
1.Loosen the trim panel with a lever.
1.Loosen the trim panel with a lever
2.Take the panel off the dash and disconnect the wires from the car.
2-1.Take the panel off the dash and disconnect the wires from the car.
2-2.Take the panel off the dash and disconnect the wires from the car.
3.Remove the four screws which are holding the original radio with a screwdriver.
3.Remove the four screws which are holding the unit with a screwdriver.
4.Take out the original radio and disconnect the wire harness at the back of the original radio.
4-1.Take out the unit and disconnect the wire harness at the back of the unit.
4-2.Take out the unit and disconnect the wire harness at the back of the unit.
5.Check all the accessories for the new Seicane stereo.
5.Check all the accessories for the new Seicane car radio.
6.Connect the Seicane stereo to your original car radio ‘s plugs.
6-1. Connect the Seicane car stereo to your original car radio ‘s plugs.
6-2. Connect the Seicane car stereo to your original car radio ‘s plugs.
7.Put the new Seicane stereo into the dash.
7.Put the new Seicane stereo into the dash.
8.Turn on the new radio and have a test if the new Seicane stereo is working without problem..
9.Put trim panel back on your new Seicane stereo after the normal test.
Wish the above installation guide can be helpful for you. If you have any question, please don’t hesitate to ask your dealer. If it’s the first time for you to replace a factory radio, you’d better ask a professional to help you. Or incorrect installation will cause irreparable damage to both your car and your new radio.
Besides, if you don’t find a suitable stereo for your car, I’ d like to recommend an ideal 2004 2005 2006 2007 2008 Chrysler Pacifica car stereo from Seicane to you. It comes with the latest configurations and the most advanced features for you to upgrade your factory radio. Here’s the link, please click for more details:
This remarkable Chrysler Pacifica car stereo is integrated with the worldwide real-time GPS navigation system, you can even easily get to hard-to-find locations within the least time. While navigating, you can keep yourself and your passengers safer and more enjoyable by making and receiving hands-free calls and streaming music via the bluetooth technology. A backup camera can also be connected to this stereo to help you park more easily.
Just travel anywhere with this amazing Chrysler Pacifica car stereo with you all the way to get the greatest fun! Good luck to you!
Recent Comments