When the idea to upgrade your factory radio with a brand new multifunctional car stereo, you may have a lot of concerns which include its price, features, compatibilities, design, quality, installation, etc. Among all of these factors, only the installation can be possible to be in your own control. If you have some related installation experience and a correct guide, you can achieve the installation on your own. Please look at the image below, it’s a modern Seicane 2004-2013 Skoda FABIA car stereo with high configurations. If you also have the same dashboard, you can take the following 2004-2013 Skoda FABIA car stereo installation guide as a reference.
2004-2013 Skoda FABIA car stereo after installation
Precautions for this installation:
1.Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2.Please make sure that all fastened wires are isolated with electrical tape.
3.Please make sure the ignition is off to avoid short circuit.
2004-2013 Skoda FABIA car stereo installation guide
Step1: Remove the trim panel.
Please pry around the trim panel with a lever. While prying, please loosen the trim panel with your hand. When the trim panel is loosened, please remove the trim panel off the dashboard and gently place it aside for further removal.
2004-2013 Skoda FABIA car stereo installation step 1
Step2: Remove the four screws on the radio.
Please unscrew the four screws which are holding the radio at four corners with a screwdriver. Then keep them well in a small box for the installation of a new radio.
2004-2013 Skoda FABIA car stereo installation step 2
Step3: Take the factory radio out of the dash.
After the four screws are unscrewed, you can easily pull the factory radio out of the dash.
2004-2013 Skoda FABIA car stereo installation step 3
Step4: Disconnect the wiring harness.
Before you put the factory radio aside, please disconnect the wiring harness at the back of it.
2004-2013 Skoda FABIA car stereo installation step 4
Step 5: Connect the new Seicane car stereo to the original wiring harness as the user manual or the wiring diagram shows.
Step 6: Turn on the new Seicane car stereo to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
Step 7: Put the new Seicane car stereo into the dash and install four screws.
Step 8: Install the trim panel into its original place.
In a word, the installation of a new stereo is quite simple, but please make clear every step before you start to install it. If it’s the first time to install a stereo, you’d better do it under the guidance of a professional or directly have it installed.
It’s also important to check the compatibility of your new stereo with your car. If you have no idea about how to check it, you can refer to the following link which is high-end 2004-2013 Skoda FABIA car stereo from Seicane with a lot of advanced features, please click:
This advanced double din Skoda FABIA car stereo is an ideal replacement for the factory radio in your car. Take this multimedia player as your loyal companion, you won’t feel bored with its powerful entertainment function which can support various kinds of audio and video formats to amuse you and your passengers, which includes DVD/VCD/CD/MP3/MPEG4/DIVX/CD-R/WMA/JPEG. You can easily find your way to any location with the help of the accurate guidance provided by the GPS feature.
Wish you’d like this intelligent Skoda FABIA car stereo and enjoy your brand new and amazing driving experience with it! Good luck to you!
Recent Comments