To enhance your car’s capabilities, it is a wide choice for you to replace your factory radio with a new aftermarket car radio which comes with a wide range of practical and entertainment features to offer you convenience and enjoyment. If you own a 2014 Mazda 3 Encore Low Version and plan to replace your factory radio, you can refer to the following installation instruction from Seicane which is about how to install a 2014 Mazda 3 Encore Low Version car radio. Wish it is helpful for you.
Here are some tips about the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and www.seicane.com make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd- 400
2014 Mazda 3 Encore Low Version car radio installation instruction
1.The original car radio.
2.Start from the right trim panel part near the air vent. Use a plastic removal tool to release this trim part.
3.Use a plastic removal tool to pry the air vent, remove it and set it aside.
4.Use a screwdriver to remove one bolt thatisholding the original car radio.
5.Release three clips to take the original car radio out from the dashboard.
6.Disconnect connectors and cables at the back the radio.
7.Check all the accessories for the new Seicane car radio.
8.Connect the harnesses to the back of the new Seicane car radio.
9.Connect the Seicane car radio to your originalradio’s plugs.
10.Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
11.Put the new Seicane car radio into the dash.
12.Put everything into their original place. All the installation is done.
That’s the whole removal and installation process for a 2014 Mazda 3 Encore Low Version car radio. If you have any doubts about this process, please feel free to consult your dealer, communicate with someone experienced or turn to a professional for help. Anyway, first of all, it is very essential for you to select an ideal car radio for your beloved car. If you don’t know which kind of car radios can work well with your car, you might as well check out the following link which is a remarkable 2014 Mazda 3 Encore Low Version car radio from Seicane.
With this car radio installed in your car, you can enjoy the best services provided by it since its operation system has been upgraded to more stable Android 6.0 version and it has a strong quad-core CPU processor.
Equipped with a large 9 inch HD 1024*600 multi-touch screen, this car radio enables you to enjoy the best display effect when you watch videos, TV programs and movies, etc as well as have a perfect view of the road ahead.
Even you don’t have a good sense of directions, with the assistance of the high-end 3D GPS navigation system, you are able to know your current locations and have the most suitable route option to reach your destinations through turn-by-turn directions and voice prompts.
And thanks to this car radio’s dual zone function, you can freely listen to music which is played behind the scene under GPS mode, and the music will automatically switch to GPS voice.
Wish you like this car radio and good luck to you!