3 Steps to Replace a Chrysler 300C Stereo with GPS Navigation DVD Stereo

Chrysler 300C stereo

Chrysler 300C stereo

 

It only takes 3 steps to upgrade your original Chrysler 300C stereo to an OEM aftermarket head unit with great functions, such as, GPS, DVD, IPod, rearview etc. http://www.seicane.com/2002-2005-2006-2007-chrysler-300-limited-touring-300c-300m-gps-radio-bluetooth-dvd-player-navigation-multimedia-audio-system-tv-aux-ipod-iphone-backup-camera-steering-wheel-control-t6015

 

Check your dashboard and the original head unit to see if it is the same as the one above. If it is, you can follow the upgrade steps below. There’s something you should notice before you take the action.

 

First, if you are a layman in car stereo upgrade, you should ask for help rather than do it yourself. Second, if you know how to upgrade and do it yourself, please ask for help once you cannot deal with the problems during upgrade because there may be special case.

 

Cut off the power supply during removal. Prepare tools for the upgrade. When you meet problems you are not sure, ask for help immediately.

 

Chrysler 300C stereo removal steps:

 

Step1: dismantle the trim panel.

The trim panel is inserted in the dashboard hard. Use a flathead screwdriver to pry it as the picture shows below. Do it carefully and don’t destroy the trim panel. You can pry from the bottom to the top, and pry from left to right. After several rounds prying, the trim panel can be taken off the dashboard easily. However, there are wires at the back of it. Remove them before you take it down.

 

remove trim panel on Chrysler 300C

remove trim panel on Chrysler 300C

Step2: remove the old head unit.

The original radio is fixed in the dash with screws. Unscrew the screws at the corners of the radio. Then, take the unit out of the dash. Use a tool to remove the wires at the back of the unit and put it away.

 

remove screws on Chrysler 300C

remove screws on Chrysler 300C

Step3: install the new unit.

Take out the new stereo with cables. Connect the cables to the original wiring harness. Then, slide the unit into the dash and turn it on to test. You should pay attentions to GPS, TV, radio functions. They will work with antennas. If you find there are problems in usage, first double check the wire connection. If the problems are still there, please ask professionals for help.

 

Wish everything’s good in your car. Then, install the trim panel back to the dashboard by connecting the wires and embed it to the dashboard. Wish it could help you.

 

If you are looking for good and cheap new Chrysler 300C stereo, the following is a great one for your choice. It’s from Seicane.com. And, it’s on discount now: http://www.seicane.com/2002-2005-2006-2007-chrysler-300-limited-touring-300c-300m-gps-radio-bluetooth-dvd-player-navigation-multimedia-audio-system-tv-aux-ipod-iphone-backup-camera-steering-wheel-control-t6015

 

It has steady Wince operation system and supports steering wheel control. You can operate it in the touch screen directly.

 

It supports 3D navigation map. It supports dialing numbers or answering calls on the screen by Bluetooth function. It supports radio RDS and 30 stations preset for AM/FM. It supports IPod and IPhone music by an IPod cable and so on.

 

It can do more for you. Make sure it fits your car before ordering. If you have any questions, you can ask the online customer services for help. Wish you enjoy shopping.

 

 

 

You may also like...

2 Responses

  1. Fred says:

    Was just reviewing your car stereo replacement unit for a 2007 Chrysler 300C. What is the cost to purchase the unit?

Leave a Reply to Fred Cancel reply

Your email address will not be published. Required fields are marked *