As you know, with a correct helpful guide, you can follow it to do a lot of things on your own. And the installation of a new aftermarket car radio is no exception. So if you are going to replace your factory radio, you can search for an instruction to help you. Here I’d like to introduce a detailed 2013 2014 2015 Mercedes-Benz SMART car radio installation instruction from Seicane to you. If you have the same or similar dashboard, you can refer to it.
2013 2014 2015 Mercedes-Benz SMART car radio after installation
Some tips before the installation:
1.Please disconnect the power before the installation.
2.Please prepare a lever and a screwdriver before the removal and the installation.
3.Please keep all the separate parts from the car. Please take great care of the dashboard to avoid scratching it during its detachment and installation. Please keep handy any parts from the car and make use of all the original screws from the car as much as possible. so each related part of the unit can be fixed securely.
4.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2013 2014 2015 Mercedes-Benz SMART car radio installation instruction
1. The original car radio.
The original car radio
2. Use a lever to remove the panel marked in the picture.
Use a lever to remove the panel marked in the picture
3. Remove the screws marked with a red arrow.
Remove the screws marked with a red arrow
4. Use a lever to remove the decoration panel.
Use a lever to remove the decoration panel
5. Remove the two screws marked in the picture.
Remove the two screws marked in the picture
6. Pay attention to the buckles marked with red arrows. Push the unit down a little as the green arrow shows and pull out the unit.
Pay attention to the buckles marked with red arrows. Push the unit down a little as the green arrow shows and pull out the unit
7. Connect the cables with the new Seicane car stereo.
Connect the cables with the new Seicane car stereo
8. Connect the cables with the new Seicane car stereo.
Connect the cables with the new Seicane car stereo
9. Put the new Seicane car stereo into the dash.
10. Have a test of the new Seicane car stereo to check if everything works properly. If it doesn’t, please check whether all the cables are connected correctly.
Have a test of the new Seicane car stereo to check if everything works properly. If it doesn’t, please check whether all the cables are connected correctly
11. Put everything into their original place. All the installation is done.
Before the installation, please make clear every specific step. If you have any doubts, you can contact with your dealer or seek help from a professional. In order to finish the whole installation process successfully, firstly you need to check whether your new radio fits your car very well or not. If you don’t have any ideas, you can check the following link which is a remarkable 2013 2014 2015 Mercedes-Benz SMART car radio from Seicane. For more details, please click:
With this marvelous 2013 2014 2015 Mercedes-Benz SMART car radio in your car, you are able to enjoy the greatest convenience and enjoyment it brings to you. The high-end 3D GPS navigation system of high accuracy is specially built in for you to find the right way to get to your destinations through the guidance of the turn-by-turn directions and voice prompts. And you can utilize the Bluetooth technology to synchronize your Bluetooth-enabled mobile phone with this unit for getting access to hands-free calls and streaming music, which can promise you of a trip full of safety, convenience and enjoyment. Wish you like it and good luck to you!
Recent Comments