As you know, nowadays more and more features are equipped in a car radio, so more car owners would like to upgrade their factory radio by installing a new aftermarket car radio. Since most of car radios are just plug an play and easy to install, some car owners can remove the factory radio and install the new car radio by themselves. If you also want to have a try, you can find a step-by-step installation guide to help you. This article aims to introduce a 2004 2005 2006 2007 2008-2011 Ford Focus Exi MT car radio installation instruction from Seicane to you. Wish it is helpful for you.
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2004 2005 2006 2007 2008-2011 Ford Focus Exi MT car radio installation instruction
1. The original car radio.
2. Carefully pry the plastic trim plate with both of your hands, which is in front of the place where the old car radio is situated.
3. Use a Philips screwdriver to unscrew the four self-tapping screws.
4. Gently remove the original car radio out of the dash.
5. Disconnect the antenna and connectors at the back of the original car radio.
6. Check all the accessories for the new Seicane car radio.
7. Connect the harnesses to the back of the new Seicane car radio.
8. Connect the Seicane car radio to your original car radio’s plugs.
9. Turn on the new Seicane radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
10. If the new Seicane car radio works well, put it into the dash.
11. Put everything into their original place, and all the installation is done.
Wish the above installation instruction can do some help to your installation. If you have any doubts about either your car radio or the installation, please feel free to contact your dealer or seek help from a professional technician. If you are not confident about achieving the whole upgrade process, you’d better directly go to a car radio upgrade center and ask a professional technician to help you install the new car radio.
However, if you are still searching for a suitable car radio for your beloved car but don’t have any ideas that what kind of car radios can work well with your beloved car, you can check out the following link. It is a marvelous 2004 2005 2006 2007 2008-2011 Ford Focus Exi MT car radio from Seicane I would like to recommend to you.
This car radio, based on the stable Android 6.0 operation system and a powerful quad-core CPU processor, is compatible with a wide range of practical and entertainment features which allows you to have a brand new driving experience.
Even you don’t have a good sense of directions, with the high-accuracy 3D GPS navigation system, you don’t have to worry about getting lost. Under the guidance of the turn-by-turn direction and voice prompts, you can quickly locate where you are and navigate to any locations you would like to go to. Additionally, while navigating, thanks to this unit’s dual zone function, while navigating you are able to listen to your favorite music.
What’s more, under the wireless Bluetooth technology, after you pair your Bluetooth-enabled mobile phone with this car radio, hands-free phone calls and streaming music are both available for you with keeping your hands on the steering wheel and your eyes on the road ahead.
If you like this unit, don’t hesitate to add it to your cart. Wish you enjoy your trip.