How to upgrade a 1997-2004 AUDI A6 S6 RS6 gps car navigation system with Mirror Link Backup Camera DVR OBD2 DAB+

In past, most car owners might think the installation of a car stereo should be finished by experienced technicians with specialized knowledge. But now more and more car owners start to replace factory radio on their own since they think it not difficult to install a car radio with a correct installation guide. The following comes a 1997-2004 AUDI A6 S6 RS6 gps car navigation system installation instruction. You can keep reading carefully if you are interested in it and want to learn how to install a car radio.

1997-2004 AUDI A6 S6 RS6 gps car navigation system after installation

1997-2004 AUDI A6 S6 RS6 gps car navigation system after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400

 

1997-2004 AUDI A6 S6 RS6 gps car radio installation instruction

1.The original car radio.

The original car radio

The original car radio

2.Insert four release keys in the removal slots of the radio.

Insert four release keys in the removal slots of the radio

Insert four release keys in the removal slots of the radio

3.Pull outwards to release the radio.

Pull outwards to release the radio

Pull outwards to release the radio

4.Disconnect all the connectors at the back of the original radio.

Disconnect all the connectors at the back of the original radio

Disconnect all the connectors at the back of the original radio

5. Check all the accessories for the new Seicane car radio.

6. Connect the harnesses to the back of the new Seicane car radio.

7.Connect the Seicane car radio to your original stereo’s plugs.

8. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.

9. Put the new Seicane car radio into the dash.

10. Put everything into their original place. All the installation is done.

 

Wish the installation instruction can be helpful for you. If you have any question, you can seek help from your dealer or a professional. For avoiding unnecessary mistakes, when you meet some problems you cannot solve, you’d better go to a car stereo upgrade center to ask a technician for help. But if you don’t have a suitable car radio, I’d like to recommend a remarkable 1997-2004 AUDI A6 S6 RS6 gps car navigation system from Seicane with you. Here is the link, please click it for more details:

http://www.seicane.com/android-1997-2004-audi-a6-s6-rs6-radio-dvd-gps-navigation-system-with-bluetooth-wifi-steering-wheel-control-mirror-link-backup-camera-dvr-obd2-dab-s32577

Based on the latest Android 5.1.1 operation system, and comes with a RK3188 1.6 GHz Cortex A9 Quad-core CPU, this 1997-2004 AUDI A6 S6 RS6 gps car navigation system makes it possible for you to have a more smoother and faster operation experience.

Thanks to the advanced 3D GPS navigation system, the worldwide real-time traffic information is available for you to find the best route to reach your ideal destination accurately. Under the Bluetooth technology, you are able to get access to hands-free calls and streaming music from phone so as to keep you safer and happier in driving. Just relax both yourself and your passengers with this intelligent car radio in your car. Good luck to you!

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *