As a car owner, you must want to embrace an extremely wonderful driving experience. To achieve that goal, you can replace your old factory radio with a new multifunctional car radio which is integrated with a lot of comprehensive features to meet your different needs in car. Today I would like to share a car radio installation guide from Seicane especially for a 2013 2014 2015 2016 TOYOTA Sienna XL30 car radio with you. You might as well take it as a reference.
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2013 2014 2015 2016 TOYOTA Sienna XL30 car radio installation guide
1. Use a lever to pry along the plastic panel and remove it.
2. Release the panel under the 50 shift and hang it on the panel.
3. Remove the a/c control unit with your hands.
4. Unplug the connectors at the back of the a/c control unit.
5. Remove the screws holding the factory radio in place with a screwdriver.
6. Take the factory radio out of the dashboard.
7. Disconnect the connectors at the back of factory radio.
8. Check all the accessories for the new Seicane car radio.
10. Connect the Seicane car radio to your original car radio’s plugs.
11. Put the new Seicane car radio into your dashboard, you should check whether your connections are correct, the new unit is in right position, and you’d better have a tidy for the cables.
12. Check whether the new Seicane car radio is working without problem.
13. If there is no problem, firm removed screws that are put aside, then make trim panel back on your new Seicane car radio.
Wish the above installation guide can be helpful for you to some degree. If you have any doubts, you can browse some professional websites, consult your dealer or turn to a professional for help. Besides, it is very essential for you to pick an ideal car radio for your beloved car. If you have no ideas, you can check out the following link which is a remarkable 2013 2014 2015 2016 TOYOTA Sienna XL30 car radio from Seicane.
This marvelous car radio can be regarded as one of the best choices to replace your factory radio. It comes with a wide range of upgraded and new features such as GPS navigation system, FM/AM radio tuner, Bluetooth hands-free calls, Bluetooth streaming music, DVD player, WiFi, etc to meet almost all your different needs.
Thanks to the worldwide real-time GPS navigation system, you are able to know your current locations and find the right way to reach any locations you would like to go to according to turn-by-turn directions and voice prompts. And with dual zone function, this unit allows you to freely listen to radio, USB or SD card playback while navigating.
Wish you enjoy your driving accompanied by this multifunctional car radio. Good luck to you!