Straightforward Steps to Remove and Install a 2011 2012 2013 2014 2015-2016 Renault Captur CLIO Samsung QM3 Car Radio

If you are going to have a self-driving trip around an unfamiliar city, it is very essential for you to have a car radio featured with powerful GPS navigation system. If your factory radio has no navigation function or the function is no powerful enough, you can replace your factory radio with a modern multifunctional car radio. If you have a 2011 2012 2013 2014 2015-2016 Renault Captur CLIO Samsung QM3 and plan to upgrade your factory radio, you can refer to the following    car radio installation guide from Seicane.

2011 2012 2013 2014 2015-2016 Renault Captur CLIO Samsung QM3  car radio after installation

2011 2012 2013 2014 2015-2016 Renault Captur CLIO Samsung QM3 car radio after installation

Before and during installation, you should notice:

1.Before connecting, please make sure the ignition is off to avoid short circuit.

2.Ensure connect the yellow and red power cable at last.

3.Ensure that all loose wires are isolated with electrical tape

4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).

5.Ensure that all ground is connected to the same place.

6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.

7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400 

 

2011 2012 2013 2014 2015-2016 Renault Captur CLIO Samsung QM3 car radio installation guide

1. Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside.

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

Remove the original panel with a plastic knife, pry gently along the gap and pick up the panel, then remove it and then set it aside

2. Remove screws that fixed the radio on the dashboard.

Remove screws that fixed the radio on the dashboard

Remove screws that fixed the radio on the dashboard

3. Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio.

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

Pull the factory radio out of the dash. Pull it with medium force, as the wires are connected to the radio

4. Unplug the connectors at the back of the factory radio.

Unplug the connectors at the back of the factory radio

Unplug the connectors at the back of the factory radio

5. Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure.

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

Make antennas and cables connected step by step, and you should be very careful when you are doing this for it will affect whole procedure

6. Put the new Seicane radio into your car, you should check whether your connections are correct, and you’d better have a tidy for the cables.

7. If everything is OK, firm screws into their original place.

If everything is OK, firm screws into their original place

If everything is OK, firm screws into their original place

8. Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio.

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

Firm the panel on the new Seicane radio. Finally the new Seicane radio is installed and a comprehensive test should be conducted on the new radio

 

Wish you can learn something useful from the above installation guide. If you have any doubts about either your car radio or the installation, please feel free to contact your dealer for a wiring diagram or seek help from a professional. Or you can straightly arrange a professional technician to help you install the new car radio.

Besides, to help you select an ideal car radio for your beloved car, here I would like to recommend a remarkable 2011 2012 2013 2014 2015-2016 Renault Captur CLIO Samsung QM3 car radio from Seicane to you. For more details, please click:

https://www.seicane.com/hot-selling-android-2011-2016-renault-captur-clio-samsung-qm3-gps-navigation-car-audio-system-touch-screen-am-fm-radio-bluetooth-music-3g-wifi-obd2-mirror-link-aux-backup-camera-usb-sd-1080p-video-s18r008

With the most upgraded hardware and software, this car radio specific for 2011 2012 2013 2014 2015-2016 Renault Captur CLIO Samsung QM3 is intelligent enough for you to upgrade your factory radio. This unit’s operation system has been upgraded to the most advanced and stable Android 7.1.2 version and it has a powerful quad-core CPU processor, which enables you to have the smoothest and fastest in-car operation experience.

What’s more, with this unit installed in your car, you can get access to a wide range of practical and entertainment features, mainly including 3D GPS navigation, DVD Player, FM/AM radio tuner, Bluetooth hands-free calls, Bluetooth streaming music, file management, etc.

If you like this unit, just add it your shopping cart. Wish you have a wonderful driving experience accompanied by it. Good luck!

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *