When you feel tired or bored in car, you need to refresh yourself by playing some music, movies, TV programs, etc. If your factory radio is not compatible enough, it is high time for you to install a new aftermarket car radio which has a lot of practical and entertainment features so as to meet your needs. Since the installation of a car radio requires not much professional skills, you can do it by yourself with a correct installation instruction. If you own a 2012 Ford Focus 3, you can read this related car radio instruction carefully to get more details.
Before and during installation, you should notice:
1.Before connecting, please make sure the ignition is off to avoid short circuit.
2.Ensure connect the yellow and red power cable at last.
3.Ensure that all loose wires are isolated with electrical tape
4.Ensure don’t tangle the wire when tighten the moving parts(Such as seat rails).
5.Ensure that all ground is connected to the same place.
6.Using the improper fuse may cause damage of fire, so when replace the fuse, please consult the professional.
7.For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-devicesrd-400
2012 Ford Focus 3 car radio installation instruction
1. The original car radio.
2. Remove one bar under the radio with a plastic removal tool.
3. Remove two screws that fixed the trim panel.
4. Gently take out the trim panel.
5. Remove screws fixed the radio.
6. Pull out the original car radio.
7. Unplug the connectors at the back of the car radio.
8. Check all the accessories for the new Seicane radio.
9. Connect the harnesses to the back of the new Seicane radio.
10. Connect the Seicane car radio to your original radio’s plugs.
11. Turn on the new Seicane car radio to have a careful check if everything works well. If it doesn’t, please check whether all the cables are connected correctly.
12. Put the new Seicane car radio into the dash.
13. Put everything into their original place. All the installation is done.
Now can you finish the whole installation process with this correct instruction? If not, you can contact with your dealer for seeking help. Or you can directly ask a professional to help you install the radio. Anyway, before the installation, please make sure that your new car radio is compatible with your car. If it is not suitable, you may refer to the link below which is about a remarkable 2012 Ford Focus 3 gps dvd car radio from Seicane. Please click:
Equipped with an exquisite interface, higher performance as well as a lot of modern features, this multifunctional 2012 Ford Focus 3 car radio can be the best replacement for your factory radio. The powerful 3D GPS navigation system of high accuracy makes it possible for you to have the best route option to get to your ideal destinations without mistakes. And by simply linking your Bluetooth-enabled mobile phone with this unit, without keeping your hands off the steering wheel, you can freely make, receive or reject hands-free phone calls as well as enjoy Bluetooth music streaming from your mobile phone music playlists. Just take it home right now and wish you enjoy your trip accompanied by it!