As for the removal of a factory radio and the installation of a new car radio, if you would like to save some money, you might as well do it by yourself. After installation, a brand new multifunctional car radio will undoubtedly bring your a brand new driving experience. If you own a 2012 Mercedes-Benz Smart Fortwo and plan to replace your factory radio, you can refer to the following related car radio installation instruction from Seicane I would like to share with you.
2012 Mercedes-Benz Smart Fortwo car radio after installation
Precautions for this installation:
1. Before you start up any work, park your car well and unplug the negative power cable to avoid any danger.
2. Please make sure that all fastened wires are isolated with electrical tape.
3. Please make sure the ignition is off to avoid short circuit.
4. For your convenience, here’s the recommended tools for removal and installation from Seicane, please check for more details: http://www.seicane.com/car-dvd-dismantling-device-srd-400
2012 Mercedes-Benz Smart Fortwo car radio installation instruction
1. The original car radio.
The original car radio
2. Use a lever to remove the panel marked in the picture.
Use a lever to remove the panel marked in the picture
3. Remove the screws marked with a red arrow.
Remove the screws marked with a red arrow
4. Use a lever to remove the decoration panel.
Use a lever to remove the decoration panel
5. Remove the two screws marked in the picture.
Remove the two screws marked in the picture
6. Pay attention to the buckles marked with red arrows. Push the unit down a little as the green arrow shows and pull out the unit.
Pay attention to the buckles marked with red arrows. Push the unit down a little as the green arrow shows and pull out the unit
7. Connect the cables with the new Seicane car stereo.
Connect the cables with the new Seicane car stereo
8. Connect the cables with the new Seicane car stereo.
Connect the cables with the new Seicane car stereo
9. Put the new Seicane car stereo into the dash.
10. Have a test of the new Seicane car stereo to check if everything works properly. If it doesn’t, please check whether all the cables are connected correctly.
Have a test of the new Seicane car stereo to check if everything works properly. If it doesn’t, please check whether all the cables are connected correctly
11. Put everything into their original place. All the installation is done.
If you cannot fully understand the above steps, please don’t be worried. You might as browse some professional websites. Besides, you can seek help from your dealer, someone experienced or a professional technician.
What’s more, to help you reasonably select a suitable car radio, here I would like to recommend a remarkable 2012 Mercedes-Benz Smart Fortwo car radio from Seicane to you. For more details, please click:
When you driving around an unfamiliar city, even you don’t have any good sense of direction, you can depend on the high-end GPS navigation system. With its help, you can quickly and easily know your current locations and find the right way to your desired destinations through turn-by-turn direction and voice prompts.
Besides, under the wireless Bluetooth technology, you can freely connect your Bluetooth-enabled mobile phone to this all-in-one car radio so as get access to both Bluetooth hands-free calls and Bluetooth streaming music while navigating. Moreover, this unit’s dual zone function enables you to listen to radio, USB or SD card music playback while navigating, and the music will automatically switch to GPS voice.
This car radio is at a reasonable price now. If you like this unit, just add it to your shopping cart. Good luck!
Recent Comments